Solution for groups of cases

Top Loading


Side loading

Intermittent
Continuous

Solution for groups of cases

Compact and flexible top and side loading solution for forming, filling and closing of cases.

American case packing and wrapping solution

WRAP Case

Top Loading

Robot
Pick & Place

RSC Case

Bottom loading

Automatic

American case packing and wrapping solution

Compact and flexible solution for american top, side and bottom loading case packing and wrapping with forming, filling and closing of cases.

Cartesian robotic palletizing solution

Cartesian system


Antropomorfic robot


Cartesian robotic palletizing solution

Compact and flexible robotic and Cartesian palletizing solution

  • Robot dos ejes, encajado superior

One of its main advantages over its predecessor is height. Which has suffered a decrease in the work area and movement of the Pick and place, allowing a large number of costumers with height limitations in their facilities to automate their casepacking process without the need for a free work space of 3.5 meters height as required by the D-300 model. 

This new development is preceded by the need to improve one of its current pick and place systems, cataloged as Delta D-300.

One of its main advantages over its predecessor is height. Which has suffered a decrease in the work area and movement of the Pick and place, allowing a large number of custumers with height limitations in their facilities to automate their casepacking process without the need for a free work space of 3.5 meters height as required by the D-300 model. This new system only needs 2.8 meters height from where the base of the frame rests upwards, so it can be installed in much smaller spaces.

This system is powered by two servo reducers responsible for supplying the movement to the two independent duralumin arms that make up the robot. Which hold the base where the head and suction cup holders are placed, and through a suction system by turbine or Venturi, the product fits inside a box.

Regarding the robot, the four arms held by the aluminum ball joints have been made of carbon fiber, incorporating this type of material due to its great resistance to traction, compression and light weight. The dimensioning of the arms has been designed to be able to carry out the work path with a head weight, suction cups and product to be fitted of 100kg at a maximum cadence of 18 cycles / minute.

Regarding the maintenance of the machine, this new casepacker with two-axis robot also includes an improvement, since being composed of fewer pieces (the belts, guides and linear guides bearings of movement have been eliminated), a reduction is achieved of the time in the maintenance of the parts susceptible to wear, a lower cost of stops in the production and a decrease in the cost of manufacturing the machine itself.