Semi-automatic solution for side loading, modular, compact and flexible load. Designed for low per minute production speed.
With this generation of packers, the market needs in automating the end of line products whose regular forms are readily manageable at high production volumes are catered to.
The stack is made by lifting with side support, forming the different layers programmed with complete accuracy in terms of counting.
Cases should be placed manually on the front side waiting to be filled
Once the full cluster is obtained, the set of containers is conveyed to the inside of the case, leaving space for closing flaps and applying adhesive tape.
The BP-150 is a semi-automatic, modular, compact and flexible side packer, designed for low per minute production speed
Product feeding conveyor is 1000 mm long and 300 mm wide, with a working height of 910 mm. The feeder detects accumulation of containers, and sends a signal to stop the machine before any anomaly occurs.
Stacking of packages through a pneumatic lift, which builds up the levels on the tilting flap system with side guidance of the product, until the number of levels pre-set in the program is achieved.
The height of the containers in the entry position of the stacking should be 25 to 70 mm. For greater heights, the standard height of hatches should be amended.
SHAPE OF CASE:
The case is made manually. Once it is formed and sealed from beneath, the case is placed against the mouth and the trigger is actuated to set the arm case.
INSERTION OF THE CASE:
Combined introducer group using pneumatic pusher, which with the help of a guide of the case flaps installed thereto, ensure transfer process of set of product packs into the case.
Automatic case outlet with positioning thereof on the output roller.
All security or system failure elements, such as accumulation of product on the store conveyor, doors or protections not closed, presence of case, malformed case, lack of air pressure, etc. are displayed on a display screen built into the operating panel for quick location. Being an open system, the staff has access to counters, timers, etc. without the need of specialized personnel, because of the simplicity of its use. All electrical machine command is centralized in a PLC, allowing versatility and speed or system changes.
- For packing of rigid parallelepiped containers that can be combined with each other
- case packaging introducer, with automatic position control, ready for closing.
- Rapidly changes the mechanical format and stores them in a PLC.
- No introduction device in the absence of case
- Electrical and mechanical protections as per regulations
- Designed for low case production per minute
- Valid for RSC case
- Simplicity and adaptability to different sizes and/or formats
|Power Consumption||0,5 Kw|
|Air consumption||26 L/cycle|
|Air pressure||6 Bars|
|Capacity||Production of up to 200 cases/min according to the group|
|Product measurement||20 / 65 (Optional up to 100)||80 / 200 (Optional up to 250)|
PRODEC has brought together a team for developing these outstanding design features and functionality detailed below:
All the functions described are developed in a versatile, efficient and compact equipment, occupying a small and simple handling space for the operator. Robust and transparent from any constructive conception angle, it allows one to observe all mechanisms and operational functionality from the outside.
The clean, open design without mechanical barriers, greatly simplifies all interventions required on the equipment, whether by a change in format or a simple cleaning and maintenance regulation or routine.
Its advanced concept allows an expansion of its functions or increasing workstations to suit the required production needs, both in forming and filling.
We have used specific design methods for its development to optimize the comfort and convenience of staff working on the machine.
A powerful software developed by our technical team allows you total control over the device functions. You can also perform simple formatting changes through the incorporated touch screen. Through this, it is possible to verify production efficiency for shifts or slots, making it an effective analytical instrument. It is ready to integrate various lines of work according to the standard OMAC.